• Follow us
Home > News > Content
Agitators By Industry Ensure Equipment And Personal Safety
Oct 12, 2017

Desulfurization area of the tank more, there are limestone slurry mixer, the Agitators By Industry, the filtrate tank mixer, mostly vertical pulp type, but on the turn I have a different argument, there is said that the media Up flip, there is said to push down the media to the box around the push, saying different.

In general, after the agitator turns, the slurry is pressed down through the impeller, reaching the bottom and turning over from the surroundings. The overall trajectory of the slurry is such that the direction of rotation can be determined.

Agitators By Industry has two effects, one is to prevent the absorption tower slurry pool of solid particles in the precipitation, and the other is the uniform distribution of oxidizing air.

Agitators By Industry operation procedure

1, the magnetic stir bar into the beaker containing the solution.

2, the beaker on the heating plate, insert the sensor components.

3, turn on the power, adjust the heating speed, open the stirring.

4, stirring, it is necessary to slowly adjust the speed control knob, too fast to adjust the mixing rotor from the magnet magnetic force, kept beating. Should be quickly to the knob to stop, until the rest after the static, slowly stirring speed, step by step stable speed. Room temperature viscosity of the liquid, often heat conduction performance is also poor, heating and stirring, should not quickly heat up, so as not to collapse containers. Should make full use of thermostat device, and gradually increase the temperature, and the need to insert the sensor into the water jacket.

5, want to measure the temperature inside the container can slowly turn the thermostat knob so that the temperature indicates that the red mark drops, when the red light is on, the immediate red mark indicates the temperature of the device is the temperature of the liquid.

Agitators By Industry repair and precautions

1, Agitators By Industry must be reliably grounded to ensure equipment and personal safety.

2, stirring, it is necessary to slowly adjust the speed control knob, too fast to adjust the mixing rotor from the magnet magnetic force, kept beating. Should be quickly to the knob to stop, until the rest after the static, slowly stirring speed, step by step stable speed.

3, the hot plate surface aluminum plate, if the liquid, will erode the disk or heat up the gas, affecting the electric components and motors, need to immediately turn off the power to clear the.

4, room temperature viscosity of the liquid, often thermal conductivity is also poor (such as epoxy resin), heating and stirring, should not quickly heat up, so as not to collapse containers. Should make full use of thermostat device, and gradually increase the temperature, and the need to insert the sensor into the water jacket.


Previous: No Information

Next: Impellers To Ensure The Overall Surface Quality